Respiratory Half Masks and Filters
Activities like sanding, welding, painting, or even repairs can decrease your air quality, possibly putting your health at risk.
Instead of allowing harmful airborne irritants to make their way into your mouth, nose, throat, or lungs, you should use a respirator. Respirators fit over your nose and mouth to form an air filter to reduce the number of particles and vapours you inhale.
They are classified by the type of hazard they protect against, their APF (Assigned Protection Factor) and the specific substance(s) they’re approved for.
3M Half Mask Respirator (6000Series)
Small – SKU:6100
Medium – SKU:6200
Large – SKU:6300
The reusable Half Face Respirator 6000 Series is low-maintenance, simple to use and extremely lightweight. Combine with a broad range of twin, lightweight 3M™ filters or cartridges to provide respiratory protection against particulates and a variety of gases and vapours.
Flexible system for use with 3M gas, vapour and particulate cartridges and filters.
Primary Material – Thermoplastic
Standards/Approvals – Complies with AS/NZS 1716:2012
6057 Filters for Half Mask 6000 Series SKU: CMAR6057
Provides protection against: Organic Vapours (boiling point > 65ºC) Inorganic & Acid Gases (A1B1E1)
Protection Factors. Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant.
This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels:
– With a 3M 6000 Series Half Face Respirator: for airborne concentrations up to 10 times the Workplace Exposure Standard (WES) or 1000 ppm, whichever is the lower.
6059 Filters for Half Mask 6000 Series SKU: CMAR6059
Provides protection against Organic Vapours (boiling point > 65ºC) Inorganic & Acid Gases, Ammonia and Methylamine (A1B1E1K1). Low profile and well-balanced twin filter design.
Note that any filtering respirator should not be used for protection at airborne concentrations of contaminants above the relevant Immediately Dangerous to Life or Health (IDLH) levels
This cartridge/filter, when used for protection against the contaminants as specified, is capable of providing the following protection levels: – With a 3M 6000 Series Half Face Respirator: for airborne concentrations up to 10 times the Workplace Exposure Standard (WES) or 1000 ppm, whichever is the lower.