Full Face Respirator Filters
Our full-face respirator filters are designed for both the CF01 and FS01 respirators, providing protection against particulates, gases, vapours, and mixed chemical hazards. Each filter type is engineered for secure attachment, reliable performance, and compliance with hazardous substance handling requirements.
Available Filter Types:
Particulate & Combined Filters P2R – Particulate Filter Pair P2RC – Combined Filter P3R – Particulate Filter P3RC – Combined Filter YABEK1P3R – Combined Filter
Gas Filters CA‑A1 – Gas Filter CA‑A2 – Gas Filter CA‑AX – Gas Filter CA‑ABEK1 – Gas Filter
We also supply Full Face Respiratory Kits, which include selected filters and a compatible respirator for workplaces needing a ready‑to‑use solution.
As noted on the Full Face Respirators page, the FS01 model features an anti‑fog visor and a wider 3D‑curve viewing window for improved visibility compared to the CF01.
Reusable P2 Particulate Filter (P2R) SKU:P2R Filter
Filter 94% of particulates.
Mechanical filtration doesn’t lose filtration efficiency as it gets full or wet. The filters are water and oil-repellent.
Hard casing protects filter material from damage.
Two required per mask.
ClipOn P2 PreFilter (P2RC) SKU:P2RC Filter
P2 pre-filter, clips over gas filters to make a combined particulate and gas filter.
Filters 94% of particulates.
Filters are water and oil-repellent. Easy to connect, no filter retainers required, they simply clip onto the gas filter.
Two required per mask.
Compatible Gas Filters:
CA-A1 CA-A2 CA-AX CA-ABEK1
Reusable P3 Particulate Filter (P3R) SKU:P3R Filter
Filter 99.95% of particulates.
Mechanical filtration doesn’t lose filtration efficiency as it gets full or wet. The filters are water and oil-repellent.
Hard casing protects filter material from damage.
Two required per mask.
Clip On P3 Pre-Filter (P3RC) SKU:P3RC Filter
P3 pre-filter, clips over gas filters to make a combined particulate and gas filter.
Filters 99.95% of particulates.
Filters are water and oil-repellent. Easy to connect, no filter retainers required, they simply clip onto the gas filter.
Two required per mask.
Compatible Gas Filters:
CA-A1 CA-A2 CA-AX CA-ABEK1
Offers protection when working with particles and mentioned gases SKU:YABEK1P3R Filter
Working with particles and the following gases:
Organic gases and vapours (boiling point > 65°C)
Inorganic gases and vapours [excluding CO]
Sulphur dioxide and other acidic gases and vapours
Ammonia and organic ammonia derivatives
For organic, inorganic, sulphur dioxide and other acidic gases & vapours, ammonia & organic ammonia derivatives and particles.
Organic Gas & Vapour Filter (CA-A1) SKU:CA-A1 Filter
Organic Gas & Vapour Filter (CA-A1) offers protection when working with organic vapours with a boiling point >65°C
Offers protection also when working with organic solvents such as xylene, toluene, MEK plus degreasers, paint thinners and adhesives.
Twist-lock connection to masks is quick and easy to secure.
Two required per mask.
Can also be used for pesticides, herbicides and paint spray when partnered with a P2RC or P3RC pre-filter.
Organic Gas & Vapour Filter (CA-A2) SKU:CA-A2 Filter
Organic Gas & Vapour Filter (CA-A2) is designed for areas of higher concentration of organic gasses and vapours with a boiling point >65°C.
This class 2 filter is designed for areas of higher concentration of organic gasses and vapours, up to a maximum of 5,000 ppm (0.5% of volume).
Offers protection when working with organic solvents such as xylene, toluene, MEK plus degreasers, paint thinners and adhesives.
Two required per mask.
Can also be used for pesticides, herbicides and paint spray when partnered with a P2RC or P3RC pre-filter.
Organic Gas & Vapour Filter(CA-AX) SKU:CA-AX Filter
Organic Gas & Vapour Filter (CA-AX) offers protection when working with organic solvents with low boiling points.
(<65°C) such as acetone, butane, methanol, vinyl chloride etc.
AX filters are single-use only and must be replaced after every shift.
Twist-lock connection to masks is quick and easy to secure.
Two required per mask.
Multi-Gas Filter (CA-ABEK1) SKU:CA-ABEK1 Filter
ABEK1 Multi-Gas Filter offers protection against organic and inorganic gases and vapours, sulphur dioxide and other acid gases, ammonia and organic ammonia derivatives.
Use where multiple gases and vapours exist.
Twist-lock connection to the mask is quick and easy to secure.
Two required per mask.
Can also be used for pesticides, herbicides and paint spray when partnered with a P2RC or P3RC pre-filter.
Class 1 filters are suitable for environments with contamination levels below to 1000 ppm.
• Full Face Respirators
• Full Face Respiratory Filters
• Full Face Respirator Kits
• Full Face Respirator Accessories
Frequently Asked Questions:
• Which filters fit the CF01 and FS01 respirators?
All filters listed above are compatible with both respirator models.
• What is the difference between particulate, gas, and combined filters?
Particulate filters protect against dusts and aerosols; gas filters protect against vapours; combined filters protect against both.
• How do I choose the right filter?
Match the filter type to the hazard classification — particulate, gas, vapour, or mixed exposure.
• How long do filters last?
Replace filters when breathing resistance increases, after heavy exposure, or according to manufacturer service life guidelines.
• Are filters interchangeable between kits and standalone respirators?
Yes. All filters listed are compatible with both individual respirators and full-face kits.
• Can I use these filters for emergency spill response?
Yes, provided the filter type matches the chemical hazard present.