Full Face Respirators
Full-face respirators provide complete respiratory and eye protection when working with hazardous substances, chemical vapours, particulates, and spill response environments. These masks form a secure seal around the face, combining high‑performance filtration with a clear, impact‑resistant visor for maximum visibility and safety.
We offer two types of Full Face Respirators:
The CF01 Respirator is reusable, with a 6 point head harness and speech diaphragm for clear communication. Twist-lock connection for gas and particulate filter can make changing filters quick and easy.
The FS01 Respirator also has an anti-fog visor and a wider 3D-curve visor for a larger field of vision.
Both Respirators can have the filters:
YABEK1P3R – Combined Filter, P2R – Particulate Filter, P2RC – Combined Filter
P3R – Particulate Filter, P3RC – Combined Filter
CA-A1 – Gas Filter, CA-A2 – Gas Filter
CA-AX – Gas Filter, CA-ABEK1 – Gas Filter
We also offer Full Face Respirator Kits.
CF01 Full Face Respirator SKU:CF01 Available in Small, Medium, and Large
The 6-point head harness gives more adjustment and a better fit.
Polycarbonate 3D-curve visor with an anti-scratch coating.
Speech diaphragm for clear communication.
Twist-lock connection for gas and particulate filter can make changing filters quick and easy.
Ultra-lightweight at 360g.
Glasses can be worn under this mask with the Corrective Glasses Lens Frame accessory.
FS01 Full Face Respirator SKU:FS01 Available in Small, Medium, and Large
The 6-point head harness with metal clips gives more adjustment and a better fit.
Wider Polycarbonate 3D-curve visor for a large field of vision.
Anti-scratch coating on the outside and Anti-Fog Coating on the inside.
Speech diaphragm for clear communication.
Twist connection makes changing filters quick and easy.
New inner mask easier to remove and refit.
Lightweight at 415g.
Glasses can be worn under this mask with the Corrective Glasses Lens Frame accessory.
• Full Face Respirators
• Full Face Respiratory Filters
• Full Face Respirator Kits
• Full Face Respirator Accessories
Frequently Asked Questions:
• What hazards do full-face respirators protect against?
Full-face respirators protect against chemical vapours, airborne particulates, biological hazards, and splash risks.
• How do I choose the right filter?
Select filters based on the substance type (gas/vapour/particulate). Always match the filter rating to the hazard classification.
• How often should filters be replaced?
Replace filters when breathing resistance increases, after heavy exposure, or according to manufacturer service life guidelines.
• Are full-face respirators reusable?
Yes. Clean and inspect the mask after each use, and store it in a sealed container away from contaminants.
• Do these respirators fit all face shapes?
Most models include adjustable straps and soft sealing surfaces to ensure a secure fit across a wide range of users.
• Can I wear glasses with a full-face respirator?
Standard glasses cannot be worn inside the mask. We do have inserts designed for full-face respirators if required.