Full Face Respirator Filters
For both the CF01 and FS01 Full Face Respirators, we have:
P2R – Particulate Filter Pair, P2RC – Combined Filter, P3R – Particulate Filter, P3RC – Combined Filter
YABEK1P3R – Combined Filter, CA-A1 – Gas Filter, CA-A2 – Gas Filter, CA-AX – Gas Filter, CA-ABEK1 – Gas Filter
We also have Full Face Respiratory Kits.
As mentioned on the page for the Full Face Respirators, the difference between the CF01 and FS01 is that the FS01 Respirator also has an anti-fog visor and a wider 3D-curve visor for a larger field of vision.
Reusable P2 Particulate Filter (P2R) SKU:P2R Filter
Filter 94% of particulates.
Mechanical filtration doesn’t lose filtration efficiency as it gets full or wet. The filters are water and oil-repellent.
Hard casing protects filter material from damage.
Two required per mask.
ClipOn P2 PreFilter (P2RC) SKU:P2RC Filter
P2 pre-filter, clips over gas filters to make a combined particulate and gas filter.
Filters 94% of particulates.
Filters are water and oil-repellent. Easy to connect, no filter retainers required, they simply clip onto the gas filter.
Two required per mask.
Compatible Gas Filters:
CA-A1 CA-A2 CA-AX CA-ABEK1
Reusable P3 Particulate Filter (P3R) SKU:P3R Filter
Filter 99.95% of particulates.
Mechanical filtration doesn’t lose filtration efficiency as it gets full or wet. The filters are water and oil-repellent.
Hard casing protects filter material from damage.
Two required per mask.
Clip On P3 Pre-Filter (P3RC) SKU:P3RC Filter
P3 pre-filter, clips over gas filters to make a combined particulate and gas filter.
Filters 99.95% of particulates.
Filters are water and oil-repellent. Easy to connect, no filter retainers required, they simply clip onto the gas filter.
Two required per mask.
Compatible Gas Filters:
CA-A1 CA-A2 CA-AX CA-ABEK1
Offers protection when working with particles and mentioned gases SKU:YABEK1P3R Filter
Working with particles and the following gases:
Organic gases and vapours (boiling point > 65°C)
Inorganic gases and vapours [excluding CO]
Sulphur dioxide and other acidic gases and vapours
Ammonia and organic ammonia derivatives
For organic, inorganic, sulphur dioxide and other acidic gases & vapours, ammonia & organic ammonia derivatives and particles.
Organic Gas & Vapour Filter (CA-A1) SKU:CA-A1 Filter
Organic Gas & Vapour Filter (CA-A1) offers protection when working with organic vapours with a boiling point >65°C
Offers protection also when working with organic solvents such as xylene, toluene, MEK plus degreasers, paint thinners and adhesives.
Twist-lock connection to masks is quick and easy to secure.
Two required per mask.
Can also be used for pesticides, herbicides and paint spray when partnered with a P2RC or P3RC pre-filter.
Organic Gas & Vapour Filter (CA-A2) SKU:CA-A2 Filter
Organic Gas & Vapour Filter (CA-A2) is designed for areas of higher concentration of organic gasses and vapours with a boiling point >65°C.
This class 2 filter is designed for areas of higher concentration of organic gasses and vapours, up to a maximum of 5,000 ppm (0.5% of volume).
Offers protection when working with organic solvents such as xylene, toluene, MEK plus degreasers, paint thinners and adhesives.
Two required per mask.
Can also be used for pesticides, herbicides and paint spray when partnered with a P2RC or P3RC pre-filter.
Organic Gas & Vapour Filter(CA-AX) SKU:CA-AX Filter
Organic Gas & Vapour Filter (CA-AX) offers protection when working with organic solvents with low boiling points.
(<65°C) such as acetone, butane, methanol, vinyl chloride etc.
AX filters are single-use only and must be replaced after every shift.
Twist-lock connection to masks is quick and easy to secure.
Two required per mask.
Multi-Gas Filter (CA-ABEK1) SKU:CA-ABEK1 Filter
ABEK1 Multi-Gas Filter offers protection against organic and inorganic gases and vapours, sulphur dioxide and other acid gases, ammonia and organic ammonia derivatives.
Use where multiple gases and vapours exist.
Twist-lock connection to the mask is quick and easy to secure.
Two required per mask.
Can also be used for pesticides, herbicides and paint spray when partnered with a P2RC or P3RC pre-filter.
Class 1 filters are suitable for environments with contamination levels below to 1000 ppm.