Disposable Coveralls
Coveralls are popular because they can be slipped on over other work clothes to offer protection to the body and normal work clothes. This helps fend off grease and other spills common to a work environment.
Disposable Coveralls – White – sz Large SKU:PM2500
Microporous Fabric Coverall: sz L
Comfortable & breathable. Good resistance to tears & punctures.
Resists dirt, liquids, dust & powders. Hooded with elasticated wrists & ankles.
Certifications:
Category 1,2 & 3 certified for minimal, intermediate & high risk areas.
Type 5 & 6 certified.
Areas of use:
Asbestos Removal Powder & liquid handling
Painting cars & buildings Cleaning
Applicable Industries: Boat Building
Construction Industrial Cleaning
Asbestos Removal
Performance Level:
Low Level Spray Test: Pass (EN ISO 17491-4)
Aerosol Penetration: Pass (EN ISO 13982-2)
Tear Resistance: Class 2 (EN ISO 9073-4)
Tensile Strength: Class 2 (EN ISO 13934-1)
Puncture Resistance: Class 1 (EN 863)
Seams Strength: Class 3 (EN ISO 13935-2)
Disposable Coveralls – Blue – sz Large SKU:PM295BL
Fabric: Non-woven SMS-Polypropylene100%
Certified for Asbestos & hazardous substances. Strong tear-resistant material. Comfortable to wear. Zip at the front & extra neck protection.
Hooded with Elasticated Wrists and Ankles.
Areas of use:
Asbestos Removal
Fibreglass application
Biosecurity protection
Wet Areas
Performance Level:
EN ISO 13982-1 Types 5: Protection against airborne solid particulates.
EN 13034 Type 6: Limited protective performance against light spray, liquid aerosol or low pressure, low volume splashes.
EN 1073-2 Class 1: Total Inward Leakage.
Certified to the following Personal Protective Equipment model: Category 3
SMS fabric resistance to chemical penetration under EN368 –
Sulphuric Acid 30% Sodium Hydroxide 10% Isopropanol
n-Heptane
Body Measurements (cm)
Size: Chest: Body Height:
L 104 175-180
Disposable Coveralls – White – sz 3XL SKU:Coverall3000
White Coveralls with heat sealed tape. Made from 65gsm Micro-Porous film with stitched and tape sealed seams for added protection. Two way zip. Storm flap with adhesive tape seal
Type 4 EN ISO 14605 – Liquid Aerosols
Type 5 EN ISO 13982-2 Dry Particle
Type 6 EN ISO 13034 Reduced spray Suit
EN1149-1 Anti-static
EN14126 Biological Hazards (types 4-B, 5-B, 6-B)
EN 1073-2 Radioactive
Recommended Uses: Asbestos Handling, Biological Hazard, Chemical Handling, Decontamination, Powder
Coating, Industrial Clean up, Pharmaceutical Manufacturing, Hygiene/Cleaning, Waste management,
Automotive, Medical/Emergency