Drive-Over Bunding
Made from heavy-duty UV stable urethane, this bunding is specially designed to withstand the rigors of workshop traffic. It will easily withstand car, forklift, and heavy truck access.
Available in 25mm and 32mm heights.
Ultra Bund (Drive Over) 32mm SKU:UDOB32 AND Ultra Bund (Drive Over) 25mm SKU:UDOB25
Excellent chemical resistance makes it ideal for bunding most class 8 corrosives, class 5 oxidisers and other non-flammable liquids.
Pre-formed anchor points for dynabolts and right-angle corner pieces mean you can simply install to suit any size configuration.
Dimensions: 1000mm (L) x 200mm (W) x 32mm (H)
AND
Dimensions: 1000mm (L) x 150mm (W) x 25mm (H)
32mm Corner Piece SKU: UDOB32Cnr AND 25mm Corner Piece SKU:UDOB25Cnr
90° corner unit.
Comes pre-drilled for dyna bolts.
Dimensions: Outside edge: 197mm; Inside edge: 48mm for both the 32mmH and 25mmH Bunding.
Ultra Bund 5mm Spacers SKU:UBSPC5
5mm spacers for use when installing bunding.
Used to correctly install the bund to allow for expansion in the heat.
2 spacers for every 2 lengths are recommended.
Bund Dyna Bolt SKU:DYNAB
Flush head dynabolt for use with bunding. Each bund length has 6 pre-drilled holes for dynabolts. Bund corners have 4 pre-drilled holes for dynabolts.
Dimensions: 10mm (Dia.) x 55mm (L).
(need 6 per 1m length)
Ados Adhesive Sealant SKU:ADOS400
ADOS MS is High Performance Adhesive Sealant – 400g
One-component neutral curing adhesive sealant based on MS Polymers.
ADOS Sealant will not stain and is compatible with commonly used paint systems. It will not crack or show signs of aging when exposed to adverse weather conditions and harsh UV radiation.
It does not contain solvents, isocyanates and silicones.
1 x 400g tube required for every 1700mm of bunding (approx.)
For best results let it cure for 24 hours before driving over.
Bunding Installation Kit SKU: UBKIT
The Install Kit includes enough adhesive/sealant, dyna bolts, spacers and instructions to install 5mtrs of UltraBund bunding.
Additional tools required (not supplied)